Focusing on complete sets of sand and gravel equipment
TDY Series Belt Conveyor
Product Description
Applicabilities
TDY series belt conveyors are widely used for transporting non-abrasive or semi-abrasive bulk powder-shaped or granular materials in industries of building materials,brick making,mines,road construction,metallurgy and so on.For operating conditions with requirements for cold resistance,heat resistance,anti-explosion and flame retardancy,special rubber conveyor belts and corresponding protective measures will be chosen and taken.
Working Principle
The belt conveyor for sandstones is mainly composed of two endpoint drums and the closed belt tightly mounted over them.
The drum that drives rotation of the conveyor belt is the driving drum(transmission drum);the other drum is only for changing motion direction of the conveyor belt,called steering drum.
The driving drum is driven by the motor through the decelerator.The conveyor belt is dragged reliant upon the friction between the driving drum and the conveyor belt.Generally,the driving drum is mounted at the discharge end to increase the tractive force and facilitate dragging.
The materials are fed through the feed port and fall on the moving conveyor belt.They are transported to the discharge end for discharge by friction of the conveyor belt.
Technical Specifications
| Model | Belt Width (mm) | Conveying Capacity (t/h) | Installation Angle (°) | Belt Speed (m/s) |
| TDY650 | 650 | 100-280 | 0-18° | 2 |
| TDY800 | 800 | 280-400 | 2 | |
| TDY1000 | 1000 | 400-650 | 2 | |
| TDY1200 | 1200 | 650-1200 | 2.5 | |
| TDY1400 | 1400 | 1200-1600 | 2.5 | |
| TDY1600 | 1600 | 1600-2100 | 2.5 | |
| TDY1800 | 1800 | 2100-2700 | 2.5 |
Note:
Power of the TDY belt conveyor is dependent upon 4 parameters, namely conveying quantity, installation angle, belt length and speed. The above parameters are only for reference.The conveying quantity shown in the above table has been measured in respect of material bulk density ranging from 1 t/m³ to 1.6 t/m³.
The normal operating temperature of the conveyor ranges between -25°C and 45°c. When the ambient temperature is below 5°C or the difference between day temperature and night temperature is too remarkable, cold resistant conveyor belt shall be used, and the lubricating oil for the decelerator shall be resistant to low temperature!
Key words:
TDY Series Belt Conveyor
Previous： None
Next： None
Series of Products
PYY Series Single Cylinder Hydralic Cone Crusher
8HL Series High-Efficiency VSI Crusher
G Series High Pressure Grinding Roller
Get a Free Quote
PLEASE LEAVE YOUR MESSAGE AND WE WILL CONTACT YOU AS SOON AS WE RECEIVE IT!
With decades of experience in the mining and sandstone crushing field, the company has developed a full range of products that represent the advanced level of the industry.
Contact Us
Email：dahongli95@gmail.com
Tel：+8618980910282
WhatsApp：+8618980910282
Address： No.399 Daan Road, Dayi County, Chengdu, Sichuan, China
